跳转至内容
  • 版块
  • 最新
  • 标签
  • 热门
折叠
品牌标识

YunTu Forum

YTMicro.com
  1. 主页
  2. Discussion & Question
  3. YTM32B1M系列
  4. EVB_YTM32B1MD1x LINFlexD - UART cannot be achievable with baud rate 1Mbit/s

EVB_YTM32B1MD1x LINFlexD - UART cannot be achievable with baud rate 1Mbit/s

已定时 已固定 已锁定 已移动 YTM32B1M系列
12 帖子 3 发布者 714 浏览
  • 从旧到新
  • 从新到旧
  • 最多赞同
登录后回复
此主题已被删除。只有拥有主题管理权限的用户可以查看。
  • tuanduongT 离线
    tuanduongT 离线
    tuanduong
    写于 最后由 编辑
    #1

    Hello supporters.

    Now we have been faced to the problem that is SW generation by YT tool.
    The LINFlexD - UART cannot be achievable baud rate 1Mbit/s

    Screenshot 2025-08-22 102248_UART.png

    Could you provide us examples or manual to configuration this one?
    链接文本[Linflexd_Uart_Interrupt_Demo.7z](无效文件格式,允许的格式有:.png, .jpg, .bmp, .txt, .webp, .webm, .mp4, .gif, .hex, .bin, .s19, .elf, .zip, .patch, .pdf, .yct, .jpeg)

    1 条回复 最后回复
    0
    • junhanhuangJ 在线
      junhanhuangJ 在线
      junhanhuang YunTu
      写于 最后由 编辑
      #2

      Can you upload your YCT file for us to check

      1 条回复 最后回复
      0
      • xianghanX 离线
        xianghanX 离线
        xianghan YunTu
        写于 最后由 编辑
        #3

        The LinflexD peripheral clock source selects the PLL because the FIRC clock has a higher margin of error. When the UART baudrate increases, this can be affected, resulting in error frames.

        1 条回复 最后回复
        1
        • xianghanX 离线
          xianghanX 离线
          xianghan YunTu
          写于 最后由 编辑
          #4

          C4pIbEeQRos1LJxj5pqcttnXnwg.png

          1 条回复 最后回复
          1
          • tuanduongT 离线
            tuanduongT 离线
            tuanduong
            写于 最后由 编辑
            #5

            The issue has been showed with baud rate.

            1 条回复 最后回复
            0
            • tuanduongT 离线
              tuanduongT 离线
              tuanduong
              写于 最后由 编辑
              #6

              The YTM32B1MD1x LINFlexD -UART has not been supported with DMA.
              Do you have any idea to use UART with DMA? xianghan

              1 条回复 最后回复
              0
              • xianghanX 离线
                xianghanX 离线
                xianghan YunTu
                写于 最后由 编辑
                #7

                LINFlexD UART模式使用DMA传输异常数据解决方案.pdf

                1 条回复 最后回复
                1
                • tuanduongT 离线
                  tuanduongT 离线
                  tuanduong
                  写于 最后由 编辑
                  #8

                  thanks for your information, I will try to do it.

                  1 条回复 最后回复
                  0
                  • tuanduongT 离线
                    tuanduongT 离线
                    tuanduong
                    写于 最后由 编辑
                    #9

                    I have enabled DMA with LinflexD1_RX and LinflexD1_Tx trigger.
                    For transfer: when I use LinflexD1 as Uart send out data, DMA work normally.
                    For receive: When I use LinflexD1 as UArt receive data, DMA cannot work.
                    Phenomenon: data in LinflexD.Data[4] is detected by Linflex, but it cannot trigger DMA copy data to rx_buffer. It seem like the source trigger LinflexD1_Rx is not work. DO you have any idea about this situation? xianghan

                    1 条回复 最后回复
                    0
                    • tuanduongT 离线
                      tuanduongT 离线
                      tuanduong
                      写于 最后由 编辑
                      #10

                      Screenshot 2025-08-25 161130.png Screenshot 2025-08-25 161244.png

                      1 条回复 最后回复
                      0
                      • tuanduongT 离线
                        tuanduongT 离线
                        tuanduong
                        写于 最后由 编辑
                        #11

                        Hello xianghan , you can check the reference manual, that is DMA mux table for YTM32B1MD1x do not support for UART DMA.

                        1 条回复 最后回复
                        0
                        • tuanduongT 离线
                          tuanduongT 离线
                          tuanduong
                          写于 最后由 编辑
                          #12

                          Hello xianghan,
                          The issue has been showed. Thanks for your support.

                          1 条回复 最后回复
                          0

                        • 云途开发生态介绍

                          快速上手云途开发生态

                        • 云途论坛规则/Yuntu Forum Rules

                          发帖前请查看

                        • YT CONFIG TOOL调查问卷

                          帮助改进和优化YT CONFIG TOOL,有机会抽取YTM32B1ME0 EVB哦...

                        • can
                          19
                          demo
                          19
                          uds
                          11
                          lin stack
                          9
                          fbl
                          5
                          md14
                          5
                          yt-link
                          5
                          adc模块
                          4
                          Online Users
                          DerrickD
                          Derrick
                          YTBivY
                          YTBiv
                          yishui66Y
                          yishui66
                          WHQW
                          WHQ
                          wangweidongW
                          wangweidong
                          EkkoE
                          Ekko
                          junhanhuangJ
                          junhanhuang
                          sqwS
                          sqw
                          WangPeiyingW
                          WangPeiying
                          QWQ
                          QW
                          Tiger987T
                          Tiger987
                          lswsjrmL
                          lswsjrm
                          LCL
                          LC
                          WalkerDW
                          WalkerD
                          jinyiJ
                          jinyi
                          luxiaoguoL
                          luxiaoguo
                          ColinC
                          Colin
                          • 登录

                          • 登录或注册以进行搜索。
                          • 第一个帖子
                            最后一个帖子
                          0
                          • 版块
                          • 最新
                          • 标签
                          • 热门