Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.
Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).
实际板子的外部时钟是40MHz，代码是适配24MHz的。直接将MCU_PBcfg.c 中时钟修改为40MHz的，外设时钟忘记修改。目前现象是上电后VCC的电压被MCU拉低到1.2V左右，reset PIN 的电压在0.8V左右，怎么做能救回来？
彻底断电，等待几分钟，让芯片内部电荷释放一下先。用万用表测下电源地间电阻，看看短路了没
快速上手云途开发生态
发帖前请查看
帮助改进和优化YT CONFIG TOOL，有机会抽取YTM32B1ME0 EVB哦...
