<![CDATA[移植can协议栈后 上来busoff]]>3ac8a1bc-f684-4067-96eb-7ea10870adbe-04d164e384fd4c66c6fd5199fc2d1fed.png
如图：移植can协议栈后，收发器和控制器都正常的下 busoff 而且 不加协议栈 发送单个can报文是好的

]]>https://forum.ytmicro.com/topic/2339/移植can协议栈后-上来busoffRSS for NodeThu, 05 Nov 2026 13:48:32 GMTThu, 05 Nov 2026 03:20:52 GMT60<![CDATA[Reply to 移植can协议栈后 上来busoff on Thu, 05 Nov 2026 06:59:53 GMT]]>可以的 我发现发送canfd的就不行 can的可以
方便飞书不19871607375

]]>https://forum.ytmicro.com/post/10055https://forum.ytmicro.com/post/10055Thu, 05 Nov 2026 06:59:53 GMT<![CDATA[Reply to 移植can协议栈后 上来busoff on Thu, 05 Nov 2026 06:29:38 GMT]]>方便远程看下吗，弄起来会快一点

]]>https://forum.ytmicro.com/post/10047https://forum.ytmicro.com/post/10047Thu, 05 Nov 2026 06:29:38 GMT<![CDATA[Reply to 移植can协议栈后 上来busoff on Thu, 05 Nov 2026 06:28:10 GMT]]>@jiankang_wan重复了，同一个图 就是下面复位后，重新跑的那个断点位置

]]>https://forum.ytmicro.com/post/10045https://forum.ytmicro.com/post/10045Thu, 05 Nov 2026 06:28:10 GMT<![CDATA[Reply to 移植can协议栈后 上来busoff on Thu, 05 Nov 2026 04:42:41 GMT]]>img

这是什么时候的寄存器状态? 看起来在这里就busoff了

]]>https://forum.ytmicro.com/post/10044https://forum.ytmicro.com/post/10044Thu, 05 Nov 2026 04:42:41 GMT<![CDATA[Reply to 移植can协议栈后 上来busoff on Thu, 05 Nov 2026 04:23:46 GMT]]>lp666 busoff后
0e51e114-d434-48b8-881f-0a05fa59414f-image.png 057511a3-b6bd-4377-bf52-ee83a0a1504c-image.png

]]>https://forum.ytmicro.com/post/10043https://forum.ytmicro.com/post/10043Thu, 05 Nov 2026 04:23:46 GMT<![CDATA[Reply to 移植can协议栈后 上来busoff on Thu, 05 Nov 2026 04:22:32 GMT]]>jiankang_wang 182036db-6812-4625-af57-6cb8fde21528-image.png 4c61b06d-e160-4eff-819b-31a33912e287-image.png

]]>https://forum.ytmicro.com/post/10042https://forum.ytmicro.com/post/10042Thu, 05 Nov 2026 04:22:32 GMT<![CDATA[Reply to 移植can协议栈后 上来busoff on Thu, 05 Nov 2026 03:30:33 GMT]]>提供一下对应通道的mcr寄存器和esr1寄存器

]]>https://forum.ytmicro.com/post/10041https://forum.ytmicro.com/post/10041Thu, 05 Nov 2026 03:30:33 GMT